ARALIK AYI SONUNDA TESLİMİ PLANLANMAKTADIR.
İthalatta yaşanabilecek aksaklıklardan firmamız sorumlu değildir.
K2 Plus Combo Yüksek Hızlı 3D Yazıcı
Auto Identification&Mapping | Auto Run-out/Tangle Detection Auto Filament Switch & Relay | Moisture-proof Filament Storage Spring-loaded Batten Bar | Cardboard Spool Compatibility
The CFS comes with a connection hub on the back. By hooking up as many as four CFS units together, you are able to print in the splendor of 16 colors. Saves the need for extra painting afterward.
A Sturdy, King-sized Beast
Extremely steady while carrying the print bed up and down. Virtually no layer shift.
Holding exceptionally well against deformation and vibration.
The working noise of K2 Plus is only 45dB, which is credited to the virtue of step-servo motors, dynamically balanced fans, and a snug enclosure It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to.
For a large-format machine, 600mm/s is pretty fast, but that's not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s².
Timing belts may get loose over time, leading to poor print quality and accuracy. On the K2 Plus, the belt tension is checked and rigged actively by a pressure sensor instead of marhually. Now, belt tensioning is a thing you can forget about.
The steel-bladed cutter features a magnetic retraction mechanism for precise filament positioning and minimal waste, with an indicator to replace the filament when only one inch remains.
So Many Features Neatly Packed
Powered by an 80W heater, the flow rate of ABS at 280℃ can reach 40mm³/s, 66% higher than the previous design.
The part cooling airflow is nearly doubled with two auxiliary cooling fans installed on both sides of the chamber, ensuring model shapes and details are set before any stringing or warping occurs.
K2 Plus uses an Al camera on the chamber side to watch over spaghetti failure, foreign objects, idling, etc. It will alert you when an error occurs. It also supports real-time monitoring and time-lapse filming.
Tunes the Flow Rate
K2 Plus features dual independently motorized Z-axes for automatic tilt reduction, strain gauge-based auto-leveling compensation, and a pro-level first layer capability that ensures a smooth and neat initial layer without manual intervention.
The latest Creality OS will unlock the full power of your 3D printer. It features smart multi-filament management and allows for fire-tuning in expert mode or with root access. FLUIDD WebUI is also supported for your convenience.
K2 Plus is pre-assembled, so you can use it right after unpacking and screen installation. Then, a boot-up quick guide covers self-tests.
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.