Porima Guaranteed

PorimaX Smooth Carbon Fiber PET / Smooth Gold PEI Build Plate

902,48 TL

Size: 355 mm x 346.5

355 mm x 346.5

Compatible 3D Printers

Bambu Lab H2D Combo 3D Printer

Bambu Lab H2D Pro 3D Printer

Bambu Lab H2D 3D Printer

Bambu Lab H2S Combo 3D Printer

Bambu Lab H2S 3D Printer

Porima Guaranteed

Brand: PorimaX

SKU: PX-PETSCF-PEISG-355

902,48 TL

PorimaX Premium 3D Printer Build Plate

If you work with demanding filaments, this plate is for you. The carbon fiber PET side offers high heat and impact resistance with engineering materials, while the Smooth Gold PEI side gives maximum adhesion with PLA and similar filaments. One plate, endless compatibility.

Key Features

The Smooth Carbon Fiber PET surface delivers durability and heat resistance with engineering-grade filaments. Its smooth texture gives a clean first layer, especially on functional and technical parts.

The toughness of carbon fiber meets the strong grip of gold PEI in one plate. Print durable technical parts and large models on the same plate with ease.

The flexible steel construction drops easily onto your bed, and you can remove prints without damaging the surface. Held in place by the magnetic base, it stays stable print after print.

Compatible with a wide range of materials, from engineering filaments like nylon, ABS and PETG to standard PLA. No glue needed.

Snaps onto the magnetic base in seconds. Ready to go right after calibration. No extra equipment or glue needed.

Fits your existing magnetic bed system in seconds. Ready to use right after calibration. No extra tools or assembly needed.

Technical Specifications

Özellik	Değer	Açıklama
Surface A	Carbon Fiber PET	Carbon-textured, durable surface
Surface B	Smooth Gold PEI	Gold-colored, textured grip surface
Core	Spring Steel	Stainless and flexible
Total Thickness	0.6 ± 0.03 mm	Optimized for high heat transfer
Max Bed Temperature	High temperature resistance	Coating won't deform
Recommended Cleaning	99% IPA or soapy water	Do not use acetone or steel scrapers.

Surface A

Carbon Fiber PET

Carbon-textured, durable surface

Surface B

Smooth Gold PEI

Gold-colored, textured grip surface

Core

Spring Steel

Stainless and flexible

Total Thickness

0.6 ± 0.03 mm

Optimized for high heat transfer

Max Bed Temperature

High temperature resistance

Coating won't deform

Recommended Cleaning

99% IPA or soapy water

Do not use acetone or steel scrapers.

Surface Options

Smooth Carbon Fiber PET

This carbon fiber textured surface is made with a special lamination technique. Its smooth finish gives filaments a strong grip and delivers excellent results even with demanding materials like ABS and nylon. Its wear-resistant build lasts for years.
*Do not remove prints while the plate is hot; doing so can deform the plate. Remove models only after the plate has cooled down.

Smooth Gold PEI

The smooth golden surface is made with a special powder-coating technology. It helps filament grip firmly during printing and lets the model release easily once the plate cools. Its wear-resistant coating ensures long-lasting, consistent use.
*Do not remove prints while the plate is hot; doing so can deform the plate. Remove models only after the plate has cooled down.

Tips & Tricks

Z-Offset Setting

Both surfaces need a slightly closer Z-offset than other plates. Make sure your first-layer lines are slightly squished.
Bed Preheating

Let the plate sit at the right bed temperature for your filament for 1–2 minutes to keep the heat even.
Cooling Down

When the print is done, wait for the plate to cool to room temperature. Flex it gently to remove the model and avoid scratching the coating.

User Manual

1

Clean the Magnetic Base

Clean off any dust and grease.

2

Choose Your Surface

Flip the plate so the Smooth PEI or Textured PEI side faces up, depending on your filament.

3

Calibrate Z-Offset

İlk katmanın düzgün yapışması için gerekli ayarları yapın.

4

Start Printing

Set the bed temperature according to the material recommendations.

5

Remove the Print and Clean

Once cooled, flex gently to remove the model, then clean with IPA and reuse.

Elevate your 3D printing experience!

PorimaX build plates, with their excellent first-layer adhesion for demanding prints and easy model removal, will become an indispensable part of your 3D printer.