Snapmaker U1 3D Printer
Couldn't load pickup availability
Introducing Snapmaker U1.
Change filament in 5 seconds with SnapSwap™
Eliminate Filament Waste During Color Changes
In filament-changing 3D printers, during color changes, usable filament is wasted by being flushed out of the print to clean the remnants of the previous color inside the nozzle.
U1 does not use this method. It only cleans the very small amount of filament that has truly lost its properties when a new print run starts or during low-flow calibration. This reduces filament loss per print run by up to 80% .
Extremely Robust and Precise Locking System
U1 uses steel ball kinematic linkages that ensure each print head sits precisely in position. The print head locks automatically once installed; no screws, magnets, or additional motors are needed.
This system offers fast and extremely robust locking. Over 1,000,000 changeover tests have been successfully completed with zero failures.
Less Waste, Real Savings.
Other 3D printers waste a significant amount of material when printing a multi-color model. In most cases, three to four times the amount of filament used in the final product becomes waste during the printing process. The U1 eliminates this waste thanks to its intelligent printhead changing system. It reduces filament consumption, provides cost advantages, and lowers environmental impact.
Smooth Print Starts with Smart Calibration
With four print heads operating at high speed, precision is not an option, but a natural part of the system. Thanks to advanced compensation algorithms, the U1 synchronizes all print heads; dampens vibrations, precisely adjusts extrusion, and balances the print bed. As a result, the smooth and dimensionally accurate print quality expected from high-end single-printhead printers is achieved.
Print Head Offset Calibration
U1 automatically aligns each print head with the main nozzle. Offset tolerance is kept below 0.04 mm , resulting in sharp and clear prints without vertical shifts.
Vibration Compensation for Consistent Prints
Supported by a precise accelerometer sensor, Input Shaping technology suppresses vibrations caused by rapid direction changes by pre-processing motion commands and resonance frequencies. It optimizes acceleration profiles and prevents surface defects such as ghosting and ripple by adding calculated delays.
Thanks to this, the U1 delivers clean edges, smooth surfaces, and sharp details, even at high speeds.
Precisely tuned extrusion for superior detail.
U1 utilizes Pressure Advance technology to compensate for flow delays, particularly those occurring during fast movements and at sharp corners. By precisely adjusting extrusion timing according to changes in movement, it ensures a balanced and continuous filament flow even when speed fluctuates.
As a result, there is less burring, less thinning, and clear, consistent detail .
The first layer is just as important as the others.
The automatic mesh bed leveling system ensures a smooth and well-adhering base coat, giving every print a solid start.
Effortless Filament Management
The U1 is equipped with a highly compact automatic filament system capable of holding up to four filament spools ready. It manages filament detection and loading processes independently, allowing you to achieve multi-color printing effortlessly and smoothly.
3D Yazıcı Teknik Özellikleri
Baskı Kapasitesi ve Hız
(Performans Verileri)
- Baskı Teknolojisi: FDM
- Baskı Hacmi: 270 mm x 270 mm x 270 mm
- Maks. Baskı Hızı: 500 mm/sn
- Maks. Hızlanma (İvme): 20.000 mm/sn²
- Ekstrüder Başı Sayısı: 4 Adet
- Maks. Akış Hızı: 32 mm³/sn [g]
- Fiziksel Boyutlar:
- Cihaz: 584 mm x 499 mm x 730 mm
- Net Ağırlık: 18,2 kg
Ekstrüzyon ve Isıtma
(Uç ve Tabla Sistemi)
- Nozul Malzemesi: Paslanmaz Çelik
- Nozul Çapı: 0,4 mm
- Maks. Nozul Sıcaklığı: 300 ℃
- Filament Çapı: 1,75 mm
- Parça Soğutma: Ana ve Yardımcı Soğutma Fanları
- Baskı Yüzeyi: PEI Kaplı Esnek Çelik Tabla
- Maks. Tabla Sıcaklığı: 100 ℃
- Desteklenen Filamentler:
- Temel: PLA, PETG, TPU, PVA, PCTG
- Opsiyonel Kapak ile: PLA, PETG, TPU, PVA, PET, ABS, ASA, PA, PC
- Sertleştirilmiş Nozul ile: Karbon ve Cam Elyaf Takviyeli Polimerler
Elektronik ve Bağlantı
(Donanım Özellikleri)
- Ekran: 3,5" Renkli Dokunmatik (320 x 480 px)
- Bağlantı: Wi-Fi (IEEE802.11b/g/n, 2,4GHz) / USB Sürücü
- Dahili Bellek: 26 GB eMMC
- Canlı Görüntü Kamerası: 2 Megapiksel (Kapalı Baskı Odası)
- Maks. Güç Girişi:
- 1150 W (220-240V~)
- 400 W (100-120V~)
- Maks. Akım Girişi:
- 6 A (220-240V~)
- 4 A (100-120V~)
Otomatik Kalibrasyon
(Hassasiyet ve Ayarlama)
- Tabla Seviyeleme: Mesh Bed Leveling (Izgara Seviyeleme)
- Aktif Titreşim Kontrolü: İvmeölçer ve Input Shaping Kalibrasyonu
- Otomatik Akış Telafisi: Pressure Advance Kalibrasyonu
- Otomatik Ekstrüder Ofseti: Koordinat Ölçüm Kalibrasyonu
Akıllı Özellikler
(Otomasyon ve Sensörler)
- Otomatik Filament Besleme: Destekleniyor
- Yedek Mod: Destekleniyor
- Filament RFID Tanıma: Destekleniyor
- Hava Baskı Algılama: Destekleniyor
- Filament Bitim Sensörü: Destekleniyor
- Güç Kesintisi Kurtarma: Destekleniyor
- Ekstrüder Takma Hatası Algılama: Destekleniyor
- Tabla Varlık Algılama: Destekleniyor
- Tabla Tıkanıklık Algılama: Destekleniyor
Yazılım ve İşletim Sistemi
- Desteklenen Dilimleme Yazılımı: Snapmaker Orca, OrcaSlicer
- Mobil Uygulama: Snapmaker APP (Android, iOS)
- Masaüstü Yazılımı: Windows, macOS, Linux
- Firmware: Klipper
- Dosya Formatları: STL, OBJ, 3MF / G-code
Box Contents
1. Snapmaker U1 3D Printer (Textured PEI Steel Sheet) × 1
2. Tool and accessory box × 1[8]
3. Toolhead with hot end × 4
4. SnapSpeed PLA Filament ×4
5. Filament holder × 4
6. Safety Guidelines × 1
7. Quick Start Guide × 1
8. Filament feeder × 2
9. Waste collector × 1
10. Toolhead cable × 4
11. AC power cable × 1
- Choosing a selection results in a full page refresh.